EXPLORE MORE CATEGORIES
- Home
- »
- Products & Services
- »
- Single Vane Pump
Single Vane Pump
Pioneers in the industry, we offer sewon cellontech pv2r series single vane pump from India.
Sewon Cellontech PV2R Series Single Vane Pump
Product Price: Rs 2,400 / PieceGet Best Price
Minimum Order Quantity: 2 Piece
Product Brochure
Product Details:
| Discharge | 50 litre/hr |
| Applications | Automatic Transmission |
| Type | Single Vane Pump |
| Motor Horsepower | 1 HP |
| Number Of Stages | Single Stage |
| Frequency | 50 Hz |
| Flange MTG | 9.0 |
| Product Brand | Sewon Cellontech |
| PV2RSeries Single Pumps | PV2R1 |
| Model Numbers | PV2R3-116 |
| Foot MTG | 11.2 |
| Phosphate Ester Type Fluid Water Containing Fluid | -16 kPa |
| Petroleum Base Oil | -20 kPa |
Hydraulic Fluids 1. Type of hydraulic fluids The hydraulic fluids shown below can be used. With some types, however, specifications such as maximum operating speeds may be changed. For details, see the pump ratings concerned.
2. Fluid viscosity and temperature Use hydtaulic fluids on condition that the fluid viscisity and temperature requirements in Table 4 be met. Note that if any of the pumps shown in Table5 is started at loq speed, the maximum fluid viscosity is limited
3. Control of contamination Contamination of hydraulic fluids results in pump failures and recuced pumnp lives. Carry out sufficient contamination control for hydraulic fluids and keep contamination level within NAS class 12. Also, use a 100μ(150-mesh) tank filter on the suction side, more than 50mm(2 in.)away from the tank bottom.
1. Alignnment of shaft Employ a flexible coupling whenever possible and avoid any stress from bending or thrust. Maximum permissible misalignment is less than 0.25 mm (.01 inches) TIR and maximum permissible misangular is less than 0.2˚. 2. Suction pressures Set suction pressures, at the pump inlet, at the valves shown below. In addition, use suction pipes having the gauges shown in the dimensional drawings. If the pump is installed above the tank level, set the suction port below more than 1.0(3.3ft) from the oil level {or 0.8m(2.6ft.) if a phosphate ester type or water contaning type fluid is used}
Yes! I am InterestedRequest A Callback